LATEST UPDATES
Showing posts with label THERMOSETTING PLASTICS. Show all posts
Showing posts with label THERMOSETTING PLASTICS. Show all posts

Thursday, 21 January 2016

Classification Of Plastics

Plastics can be classified into:
  1. Thermoplastics and Thermosets
  2. Amorphous Thermoplastics and Crystalline Thermoplastics
  3. Commodity Plastics and Engineering Plastics.
Thermoplastic materials:
          Thermoplastic materials are those which soften on the application of heat and subsequently melt, with or without pressure and require cooling to be set to a shape.
          Thermoplastics can be reversely melted by heating and solidified by cooling in limited number of cycles without affecting the mechanical properties. On increasing the number of recycling of thermoplastics may result in color degradation, there by affecting their appearance and properties. In the molten state, they are liquids, and in the mushy state they are glassy or partially crystalline. The molecules are joined end-to-end into a series of long chains, each chain being independent of the other. Above the melting temperature, all crystalline structure disappears and the long chain becomes randomly scattered.
          The molecular structure of thermoplastic (figure 1) has an influence on the chemical resistance and resistance against environmental effects like UV radiation. The properties may also vary from optical transparency to opaque, depending on the molecular structure. The important properties of the thermoplastics are high strength and toughness, better hardness, chemical resistance, durability, self lubrication, transparency and water proofing.
          With the application of heat, thermoplastics softens and it can be moulded into desired shapes because they are highly plastic. Some thermoplastics can be joined with the application of heat and pressure. There are several techniques available for the joining of thermoplastics such as mechanical fastening, fusion bonding, hot gas welding, solvent bonding, ultrasonic welding, induction welding and dielectric welding.
      The different types of thermoplastic are: Acrylonitrile Butadiene styrene (ABS), Acetals, Acrylics, Cellulosics, Fluorocarbons, Polyamides, Polycarbonates, Polythylene (PE), Polypropylenes (PP), Polystyrenes, Polyvinyl chloride (PVC), Liquid crystalline polymers (LCP), Polyphenylene sulphide (PPS) and Vinyls.
Figure 1 Molecular structure of thermoplastics
Applications:
Thermoplastics can be used to manufacture the dashboards and car trims, toys, phones, handles, electrical products, bearings, gears, rope, hinges and catches, glass frames, cables, hoses, sheet and windows etc.,

Thermosets
          The property of material becoming permanently hard and rigid after cooling when heated above the melting temperature is called thermosets. The solidification process of plastics is known as curing. The transformation from the liquid state to the solid state is irreversible process, further heating of thermosets result only in the chemical decomposition. It means that the thermosets can't be recycled. During curing, the small molecules are chemically linked together to form complex inter connected network structures (Figure 2). This cross-linking prevents the slippage of individual chains. Therefore, the mechanical properties (tensile strength, compressive strength and hardness) are not temperature dependent, as compared to thermoplastics. Hence, thermosets are generally stronger than the thermoplastics.
Figure:2  Molecular structure of thermosets
The joining of thermosets by thermal process like ultrasonic welding, laser welding and gas welding is not possible, but mechanical fastening and adhesive bonding may be used for low strength applications.
         The different types of thermosets are Alkyds, Allylics, Amine, Bakelite, Epoxy, Phenolic (PF), Polyester, Silicone, Polyurethane (PUR) and Vinyl Easter.
Applications:
Thermosets are commonly used for high temperature applications. Some of the common products are electrical equipments, motor brush holders, printed circuit boards, circuit breakers, encapsulation, kitchen utensils, handles and knobs, and spectacle lenses.

Tuesday, 19 January 2016

Thermosetting materials

VARIOUS TYPES OF THERMOSETTING PLASTICS


Thermosetting Plastics:
          The plastic which are hardened by the heating is called as thermosetting plastics. This heating reaction is non-reversible.
          The molecules of this type of plastics have a very strong binding force. The raw material for these kind of plastics is available in liquid or solid form. These types of plastics consume more time for polymerisation.

(i) Phenol formaldehyde (PF) (BAKELITE):

                       Chemical formula of phenol formaldehyde is  It is also called as bakelite. It is obtained by the reaction of phenol with formaldehyde in an acid or alkaline medium. Asbestos, glass fibers, pigments and other additives can be added to improve its properties.
          It is generally dark in color and has high strength, stability and rigidity. It is easy to handle while casting. It is resistant to heat, most chemical and solvents.
          It is mainly used for making plugs, knobs, pulleys, bottle caps, lavatory seats, electrical parts, vacuum cleaner parts, impregnants for paper and formica, tooling, etc.,

(ii) Polyester resin:

          These plastics are manufactured by condensation polymerisation of dicarboxylic acid and dihydric alcohol followed by curing with cross-linking agent. A wide variety of products can be made by varying monomers and curing agents.
          Polyester resin has low moisture and has very good electrical resistance. It is available in variety of colors. They are generally affected by sunlight unless stabilised.
        It is generally used to manufacture paper mat, safety helmets, paints, fiber glass boats, TV parts and car bodies. Main drawback of this plastic is high cost.

(iii) Melamines:
          It has very good electrical and heat resistance. This melamine has good stability and low moisture absorption. Melamines are also called as melmac, melantine and plaskon. It is widely used moulded parts. It is generally used for making telephone sets, circuit breakers, switch panels and lighting fixtures.

(iv) Phenol furfural:


          It has good flowability at low moulding temperatures and sets quickly at correct temperatures. The phenol furfural has good resistance to moisture and electricity. Generally used for manufacturing brake linings, electrical parts and instrument cabinets.

(v) Epoxy resins:


          These are obtained by condensation polymerisation of epichlorohydrin and polydroxy compound. They are transparent, light amber color and have very little shrinkage. The popular variety of epoxy resin is araldite. It has very good electrical and chemical resistance. It is generally available in the form of liquid. It has good resistance to wear and impact. The only disadvantage is that it is expensive. While handling epoxies, following precautions are necessary
  • No use of inflamable solvents for cleaning.
  • Proper ventilation of room.
  • Use of protective equipment's like goggles, gloves etc.,
They are used as an insulating material in cable-end boxes, cable joint boxes, Instrument transformers, Tools and Dies, Jigs and Fixtures.

(vi) Silicones:


         The main property of silicone is that it has a high resistance to withstand high temperature of up to 260°C and possess excellent dielectric strength at high temperature. It is also used as water repellent in liquid state. These silicones can be compressed reinforced. It is generally used in coating, laminates, foam products and induction heating process.

(vii) Urea formaldehyde:


          It is obtained by the condensation of urea or melamine and aqueous formaldehyde. It is generally used as adhesive and binding material. These are highly cross-linking polymers. It cannot be cast but can withstand temperature up to 77°C.
          It is stretch free and more expensive. It has better electrical properties, resistant to heat, moisture, and chemicals.
          It is generally used is table ware, buttons, clock cases, glues for polywood, paints, adhesives etc.,

(viii) Alkyds:


          It is also known as oil-modified polyester. Alkyds are used in synthetic enamels and lacquers. It is used in solid from where high electrical and heat resistance are required. Used in manufacturing automobile parts.

(iX) Polyurethanes:


          It is mainly used for cushion in transportation seats for insulation and eletronic equipment as a packing material.
@2017 All Rights Reserved. Designed by WWW.SMARTWAY4STUDY.COM !!!! Sitemap !!!! Blogger Templates