Effect of Partial Balancing of Reciprocating Parts of Two Cylinder Locomotives

          We have discussed in the previous article that the reciprocating parts are only partially balanced. Due to this partial balancing of the reciprocating parts, there is an unbalanced primary force along the line of stroke and also an unbalanced primary force perpendicular to the line of stroke. 

          Locomotive engines operate at low speed and the ratio of length of connecting rod to radius of crank is generally large enough to neglect the effect of secondary force. 

The effect of an unbalanced primary force along the line of stroke is to produce:

1. Variation in tractive force along the line of stroke,  and 

2. Swaying couple

          The effect of an unbalanced primary force perpendicular to the line of stroke is to produce variation in pressure on the rails, which results in hammering action on the rails. The maximum magnitude of the unbalanced force along the perpendicular to the line of stroke is known as Hammer blow. 

Swaying couple

2. Swaying couple:

        The unbalanced portions of forces acting along the line of stroke are distance 'l' apart. These forces constitutes a couple about YY axis, which tends to make the leading wheels sway from side to side. This couple is known as swaying couple.

Note: In order to reduce the magnitude of the swaying couple, revolving balancing masses are introduced. But, as discussed in the previous article, the revolving balancing masses cause unbalanced forces to act at right angles to the line of stroke. These forces vary the downward pressure of the wheels on the rails and cause oscillation of the locomotive in a vertical plane about a horizontal axis. Since a swaying couple is more harmful than an oscillating couple, therefore a value of 'C' from 2/3 to 3/4, in two-cylinder locomotive with two pairs of coupled wheels, is usually used. But in large four cylinder locomotives with three or more pairs of coupled wheels, the value of 'C' is taken as 2/5.

Hammer Blow

3. Hammer Blow:

          The maximum magnitude of unbalanced force acting perpendicular to the line of stroke is called Hammer Blow. At high speed, this unbalanced force tries to lift the wheels from the rail. 

Let W be the dead weight of the wheel. We know that the unbalanced force along the perpendicular to the line of stroke due to the balancing mass 'm', at a radios 'r' in order to balance reciprocating parts only is mω²r sin θ.  This force is maximum when the value of the unbalanced force is equal to mω²r (when sin θ is unity, i.e. θ = 90° or 270° ). 
Thus the threshold condition for lifting of wheel (Hammer blow) can be written as 

                             Hammer Blow  ( W )   =  mω²r 

The effect of hammer blow is to cause the variation in pressure between the wheel and the rail. This variation is shown in Fig., for one revolution of the wheel. 
Let P be the downward pressure on the rail (or static wheel load)

∴ Net pressure between the wheel and the rail 

= P ± mω²r 

If  (P - mω²r )  is negative, then the wheel will be lifted from the rails. Therefore the limiting condition in order that the wheel does not lift from the rails is given by 
                                               P = mω²r    
and permissible value of angular speed  (or) lifting angular velocity of the crank :