Types of Automatic Control System
The automatic control systems are classified into two types they are:
1) Open loop (or) Unmonitored system
1. Open-loop or unmonitored system: When the input to a system is independent of the output from the system, then the system is called an open-loop or unmonitored system. It is also called calibrated system. Most measuring instruments are open-loop control systems, as for the same input signal, the readings will depend upon things ambient temperature and pressure. Following are the examples of open-loop system:
- A simple Bourdon tube pressure gauge commonly used for measuring pressure.
- A simple carburattor in which the air-fuel ratio adjusted through venturi remains same irrespective of load conditions.
- In traffic lights system, the timing of lights is present irrespective of intensity of traffic.
2. Closed-loop or monitored system: When output of a system is measured and is continuously compared with the required value, then it is known as closed-loop or monitored system. In this system, the output is measured and through a feedback transducer, it is sent to an error detector which detects any error in the output from the required value thus adjusting the input in a way to get the required output. Following are the examples of a closed-loop system:
(a) In a traffic control system, if the flow of traffic is measured either by counting the number of vehicles by a person or by counting the impulses due to the vehicles passing over a pressure pad and then setting the time of signal lights.
(b) In a thermostatically controlled water heater, whenever the temperature of water heater rises above the required point, the thermostat senses it and switches the water heater off so as to bring the temperature down to the required point. Similarly, when the temperature falls below the required point, the thermostat switches on the water heater to raise the temperature of water to the required point.
Thermostatically controlled water heater |
Great blog. All posts have something to learn. Your work is very good and i appreciate you and hopping for some more informative posts. Engineering graphics 1
ReplyDelete